25 ноября 2017, 01:58
*

Автор
Тема: Жидкости в Nitro  (Прочитано 3030 раз)

Оффлайн Yalexx ua

  • Эксперт
  • *
  • Тепловоз
  • Карма: +63/-2
  • Пол: Мужской
    • Киев
  • Авто: Nitro 2.8CRD
  • Сообщений: 12145
Жидкости в Nitro
« : 10 июля 2010, 02:28 »
0
типа ФАК по жидкостям

FLUIDS, LUBRICANTS, AND GENUINE PARTS

Engine Component
  Fluids, Lubricants and Genuine Parts
 
Engine Coolant
  Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
 
Engine Oil
  Use API Certified SAE 5W-20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to the engine oil fill cap for correct SAE grade.
 
Engine Oil Filter
  Mopar ® Engine Oil Filter, P/N 5281090 or equivalent.
 
Spark Plugs
  ZFR6F-11 (Gap .043 in [1.1 mm])
 
Fuel Selection
  87 Octane, (R+M)/2 Method
 


Engine - Export Component
  Fluids, Lubricants, and Genuine Parts
 
Engine Coolant
  Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
 
Engine Oil (Gasoline Engines) - Non ACEA Catagories
  Use API Certified SAE 5W-20 engine oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
 
Engine Oil (Gasoline Engines) – ACEA Catagories
  For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
 
Engine Oil – Diesel (without Particulate Filter)
  Use SAE 0W-40 diesel engine oils confirming to API Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 and approved to MB 229.31 or MB 229.51.
 
Engine Oil – Diesel (with Particulate Filter)
  Use SAE 5W-30 diesel engine oils conforming to API Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 (LOW ASH) and approved to MB 229.31 or MB 229.51.
 
Spark Plugs (3.7 Liter Engine)
  ZFR6F-11 (Gap .043 in [1.1 mm])
 
Engine Oil Filter (3.7 Liter Engine)
  Mopar ® 5281090 or equivalent.
 
Engine Oil Filter (2.8 Liter Diesel Engine)
  Mopar ® Oil Filter (P/N 5003558AA)
 
Fuel Selection (3.7 Liter Engine)
  91 Octane
 
Fuel Selection (Diesel Engine)
  50 Cetane or higher (Less than 15 ppm Sulfur).
 


Chassis Component
  Fluids, Lubricants and Genuine Parts.
 
Automatic Transmission
  Mopar ® ATF+4, Automatic Transmission Fluid.
 
Manual Transmission
  Mopar ® Manual Transmission Lubricant or equivalent (meeting the requirements of DaimlerChrysler Material Standard MS-9224)
 
Transfer Case
  Mopar ® ATF+4, Automatic Transmission Fluid.
 
Brake Master Cylinder/Manual Transmission Clutch System
  Mopar ® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
 
Power Steering Reservoir
  Mopar ® ATF+4, Automatic Transmission Fluid.


Axles   
 
Front Axle
       
186 FIA (Model 30)
  SAE 80W-90 Multipurpose Type, GL-5 Gear Lubricant or equivalent.
  2.6 Pints
  1.24 Liters
 
Rear Axle
       
8 1/4
  SAE 75W-140 Synthetic Gear Lubricant or equivalent.
  4.4 Pints
  2.08 Liters
 


Capacities   
 
Fuel (Approximate)
     
3.7/4.0 Liter Engine
  19.5 Gallons
  73.8 Liters
 
2.8 Liter Diesel Engine
  18.5 Gallons
  70 Liters
 
Engine Oil with Filter
     
3.7 Liter Engine (SAE 5W-20, API Certified Engine Oil)
  5 Quarts
  4.7 Liters
 
4.0 Liter Engine (SAE 10W-30, API Certified Engine Oil)
  6 Quarts
  5.7 Liters
 
2.8 Liter Diesel Engine
  7 Quarts
  6.6 Liters
 
Cooling System *
     
3.7 Liter Engine (Mopar ® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula)
  14 Quarts
  13.2 Liters
 
4.0 Liter Engine (Mopar ® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula)
  14 Quarts
  13.2 Liters
 
2.8 Liter Diesel Engine (Mopar ® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula or equivalent).
  11.8 Quarts
  11.1 Liters
 
* Includes heater and coolant recovery bottle filled to MAX level.
 
POWER STEERING SYSTEM
 
Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. (Refer to 19 - STEERING - STANDARD PROCEDURE)
 
A/C REFRIGERANT SYSTEM
 
All Models
  1.12 Pounds
  0.510 Kilograms
 
AUTOMATIC TRANSMISSION
 
Service Fill - NAG1
  10.6 Pints
  5.0 Liters
 
Overhaul - NAG1
  16.3 Pints♦
  7.7 Liters♦
 
Service Fill - 42RLE
  8.0 Pints
  3.8 Liters
 
O-haul Fill - 42RLE
  17.6 Pints♦
  8.3 Liters♦
 
♦Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
 
TRANSFER CASE
 
MP1522 (Approximate dry fill or fill to bottom edge of the fill plug hole.)
  3.80 Pints
  1.80 Liters
 
MP3022 (Approximate dry fill or fill to bottom edge of the fill plug hole.)
  4.01 Pints
  1.90 Liters
 
MANUAL TRANSMISSION
 
NSG370 (Approximate dry fill or fill to bottom edge of the fill plug hole.)
  3.17 Pints
  1.5 Liters
 
*Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
 

 
« Последнее редактирование: 12 марта 2012, 22:02 от Yalexx »
Вы не можете просматривать ссылки. Зарегистрируйтесь или Войдите
Вы не можете просматривать ссылки. Зарегистрируйтесь или Войдите

 

0 Пользователей и 1 Гость смотрят эту тему.